Auto heat shut-off after 20 seconds of use for protection
Auto screen blanking after 5 seconds of no operation
30 minutes Safety Shutoff
See Your Battery Level , Voltage and Puff Counter All in 1 place
Cartridges Sold separately
How to Use :
Make sure that the bottom magnetic connector is properly connected to the bottom of the unit. The battery will not charge if the bottom connector is not attached.
Plug into a USB-C cable and connect to a power source, you will see the red light flash when the battery is connected.
Please fully charge the battery before first use, the light will turn green once charged, disconnect the device from the power source before use.
Remove the bottom magnetic connector and firmly screw in the 510-threaded cartridge of your choice.
Insert the cartridge into the device and ensure that the bottom magnetic connector is properly reconnected. The OLED Screen will appears a small battery icon to indicate that it is being charged when connected properly, or the screen won't change.
If the device is powered off, press the power button 5 times to turn it on.
Press the bottom button 3 times or auto inhale 3 times to change voltage.
Auto Inhale on the mouthpiece two times to activate pre-heat, or you can also press the bottom button two times to activate preheat. The preheat time will last 15 seconds @ 2.0V voltage, then will switch to your previously selected voltage.
Simply pull from the mouthpiece or push the button to activate the cartridge.
